TRAD High-Speed Cut-off Machine THC-355B (Grinding Wheel Φ355mm) [Sankyo Corporation]

Purchased new and used for only one day to cut three sections of scaffolding pipe.

The grinding wheel has been replaced with a Fujiwara Sangyo 355.

Iron powder has been cleaned to the best of my ability, and it has been stored indoors.

There are minor scratches.

[Product Specifications]
This high-speed cutting machine is ideal for cutting iron materials such as iron pipes, square bars, and angle iron. The handle is designed for easy grip even during continuous cutting operations. The sub-handle includes a convex holder. The maximum cutting capacity for round pipes is Φ105mm. It is capable of making cuts at angles up to 45°.

The fixed vise has markings for angle cutting.

Applications
Cutting iron materials such as iron pipes, square bars, and angle iron.

Maximum Cutting Capacity (mm) Round Pipe Square Pipe Flat Square Pipe L-shaped Steel
90° Approx. 120 Approx. 105×105 Approx. 90×170 Approx. 110×110
45° Approx. 90 Approx. 90×90 Approx. 70×100 Approx. 80×80

Specifications
Rated Voltage AC 100V
Frequency 50-60Hz
Rated Current 15A
Rated Power Consumption 1450W
No-load Speed 3200min-1
Insulation Class Double Insulation
Grinding Wheel Size Φ355×t3×Φ25.4mm
Maximum Operating Speed 80m/S
Fixed Vise Swing Angle Right 45°
Vise Clamping Width Approx. 140-175mm
Cord Length Approx. 1.8m
Weight Approx. 14.5kg
Standard Accessories Cutting Wheel (attached to unit), Wrench, Spare Carbon Brushes
*Specifications are subject to change without notice for improvement.
*Cutting capacity is limited to when the cutting wheel is new.
*Cutting capacity varies depending on the mounting position of the fixed vise.