【Suppressor Mount】Tactical Outer Barrel for Marui Glock 26 Gas Blowback

◼️◼️◼️◼️【Pong!Kozz】plans, designs, and manufactures airsoft gun parts in compliance with Japanese domestic laws and regulations◼️◼️◼️◼️
This is a tactical outer barrel with a 14mm reverse screw thread for the Tokyo Marui G26.

A 14mm reverse screw thread, commonly used for attaching silencers and tracers, is molded approximately 0.5 inches beyond the tip of the slide.

The design omits the mechanism that lowers the rear of the chamber, which mimics the real firearm's short recoil action. This ensures smooth blowback even when a silencer is attached.
The silencer will point straight forward when the slide is closed.

A protrusion is molded near the tip of the inner barrel to tighten it.
A tapered shape is added behind the threading to reduce play between the outer barrel and the slide when the slide is closed.
An M4 set screw is additionally provided on the side of the chamber to help secure the inner barrel.

●●●●Please Note●●●●
As this product is made of resin, it may break if subjected to strong impacts, such as hitting it while a silencer is attached.
The outer barrel is held in place only by the recoil spring guide pushing it backward. If you grasp and pull the muzzle forward when the slide is closed, it will come out.

Manufactured by a major 3D printing service using MJF/PA12GB resin, black dyed.

The airsoft gun body, silencer, etc., shown in the photos are not included.

【Please Note】
While we aim for a no-modification installation, some fitting adjustments may be necessary.
We cannot provide any warranty or compensation for issues arising from installation or use. Please proceed at your own risk.

※The photos are reused for the same product, so minor details may differ from the actual item.
Thank you for your understanding.

●●●Exclusively for direct sales on Yahoo Auctions and Mercari.
Beware of fraudulent reposting sites.●●●

Glock 26 Silencer Suppressor Tracer 14mm CCW